Forums
New posts
Search forums
Image search
Shop
Amazon Store
T-Shirts
Stickers
Members
Current visitors
Supporting Member Upgrade
Sponsors
About
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Image search
Search
Search titles only
By:
Search titles only
By:
Menu
Install the app
Install
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Jeep Wrangler JK
JK General Discussion
15Rubicon no oil pressure..
Reply to thread
Message
<blockquote data-quote="15MONEYPIT" data-source="post: 446676" data-attributes="member: 23176"><p>Found my problem. I tore it back down to the new cooler/filter housing. Unplugged the sensor and got the meter out. Traced the wires through the 1 plug between firewall and motor and all good. Then I moved to the next plug on the harness that is located on top of the passenger side valve cover. Found that a pin had pushed down in the connector and lost connection. Fixed that plugged it back up and reassembled. Cranked it up and now we have oil pressure and no CEL. I had that plug apart about 2 weeks ago when I was replacing my rocker arms due to the dreaded TAPPING. I drove it around with no issues after the rockers were replaced. I am guessing it must have pushed it back some then finally worked it's way to no connection.</p></blockquote><p></p>
[QUOTE="15MONEYPIT, post: 446676, member: 23176"] Found my problem. I tore it back down to the new cooler/filter housing. Unplugged the sensor and got the meter out. Traced the wires through the 1 plug between firewall and motor and all good. Then I moved to the next plug on the harness that is located on top of the passenger side valve cover. Found that a pin had pushed down in the connector and lost connection. Fixed that plugged it back up and reassembled. Cranked it up and now we have oil pressure and no CEL. I had that plug apart about 2 weeks ago when I was replacing my rocker arms due to the dreaded TAPPING. I drove it around with no issues after the rockers were replaced. I am guessing it must have pushed it back some then finally worked it's way to no connection. [/QUOTE]
Verification
Post reply
Jeep Wrangler JK
JK General Discussion
15Rubicon no oil pressure..
Top
Bottom