Novak Conversions Jeep Wrangler JK shifters

LED Rear tail light bulbs

BVlads51

New Member
Joined
Jan 13, 2026
Messages
3
Location
Illinois
I had a turn signal bulb burn out and I decided replace them with LED ones. They worked fine when I installed them in the harness, but now the dash says both are not working and they’re giving the old fast flash despite the fact they are fully functioning. Any ideas?
 
You're going to need to wire a load resistor into your harness. I also suggest getting magnets to stick them on the tub because those resistors get hot.
 
Not sure how to do all that, probably just return them and get the old glass bulbs then. Thank you

If you don't mind spending a little money, the Oracle LED brake lights for JKs are pretty good and come with resistors so they're plug and play.
 
  • Like
Reactions: JeepJeezy
If you're going to return them and still want led bulbs, look for canbus,, built-in resistor, or anti flicker bulbs.

Honestly, the price of led rear taillight assemblies has come down in price over the years. You can easily pick up a set for under $100 and a decent set for around $60.
 
  • Like
Reactions: Cimmerian
Novak Conversions Jeep Wrangler JK shifters