Oil filter / oil cooler replacement recommendations?

I bought a cheap all aluminum one off of Amazon back in February of 2023. Got about 30,000 miles on it so far. Only issue I had was the oil temp sensor went on it. I'd swap your OEM sensors onto it if you go that route.
 
  • Like
Reactions: tJKrider
JeepJeezy said:
I bought a cheap all aluminum one off of Amazon back in February of 2023. Got about 30,000 miles on it so far. Only issue I had was the oil temp sensor went on it. I'd swap your OEM sensors onto it if you go that route.
Click to expand...

Thx for the response . I myself installed one off Amazon have 500 miles an already a leak. Didn't change my sensors when I replaced have read some reviews on the leaking oil. So I'm going to dive back in it an check it out. And I have looked at valley with camera dry for I can tell.
 
Evan said:
What replacement oil cooler would be recommended other than the OME plastic one.
Click to expand...

I bought not the cheapest but not the most expensive. I tried looking it up and can’t find it now. It was aluminum. I also changed the sensors from the old one to the new cooler. I have a 17 jk. From what I’ve read the sensors are different from older models. My jeep has 87000 miles on it. So at this time I replaced all the plugs and coils and put a new thermostat in it also. I went with champion plugs. That’s what it came with. When tearing it apart I found the a critter had been chewing some wires to the number 3 injectors. O’Reillys.Had a replacement connector for the fuel injector. So that got replaced also. We took our time to make sure everything was right. It’s not a hard job just time consuming.
 
Mike B said:
I bought not the cheapest but not the most expensive. I tried looking it up and can’t find it now. It was aluminum.
Click to expand...
You're probably thinking of the Dorman oil cooler, a popular swap for people with 3.6s.
 
Top Bottom