Gear Ratio for 35" tires

ObiWan

Jedi Master
Supporting Member
Joined
Oct 12, 2023
Messages
5
Location
Zebulon, North Carolina
So I’ve recently bought 35” tires and was wondering what the best ratio to use would be. I use it as a daily driver but also take off road a good amount. I was thinking of switching to a 3.73 or a 4.1. What brands would be best to go with and which to steer clear of. It is the 3.6 penta as well (automatic)
 
So I’ve recently bought 35” tires and was wondering what the best ratio to use would be. I use it as a daily driver but also take off road a good amount. I was thinking of switching to a 3.73 or a 4.1. What brands would be best to go with and which to steer clear of. It is the 3.6 penta as well (automatic)

You'll want at least 4.10's if not 4.56, if your going to be doing offroading then i'd say 4.56.

Also do you have Jscan or something to recalibrate your speedometer for the tires and when you do the gears?
 
You'll want at least 4.10's if not 4.56, if your going to be doing offroading then i'd say 4.56.

Also do you have Jscan or something to recalibrate your speedometer for the tires and when you do the gears?
Not yet but I’m getting one soon. I do work at a place with a scanner I can use for now tho.
 
Since it's a daily it will depend on how far you commute and your tolerance for engine speed.

Screenshot_20240415-112402~2.png


If you're starting with OEM 245s or 255s and 3.21 final drive you will gain 500rpm or so with 35s and a 4.56 at 70mph. Some maybe totally fine with that, some may hate it...

In my experience I would want to stay under 3000 and get as much gear as possible if I'm spending the money. I like @Snowbird Tom 's 4.88 route!
 
  • Like
Reactions: ObiWan
Minimum 4.56 in my personal experience and from recommendations from the shop that did mine. I went with 4.88 from Revolution and no regrets.

If you’re currently running 3.21s, you’ll also need a new ring carrier.
Can’t wait to get 88s in mine.