Need to change the oil cooler in my 15 supercharged Rubicon

T

Twizz84

New Member
Joined
Jan 17, 2023
Messages
10
Location
Burton
Took my 15 supercharged rubicon to the Reject Run at rocks and valleys offroad park in Michigan. After wheeling for a few hours I started smelling oil. Stopped wheeling and checked things out. Passenger side of trans is covered in oil. Checked below the oil filter housing and seen oil. My questions is, I have a edelbrock supercharger on my 3.6. (Bought the jeep with it) only videos or how to's I've seen have the stock intake. Are there any gaskets on the supercharger that I'll need to replace while doing the oil cooler? Going to call edelbrock customer support in the morning. They were closed by the time I got out of work. Figured I'd ask here.

20240119_200046.jpg


20240128_132000.jpg


20240119_191750.jpg
 
You're going to have to remove the blower, so, yes, you will need to replace all those gaskets. I'm sure Edelbrock has a kit.
 
  • Like
Reactions: Twizz84
Dirty Dog said:
You're going to have to remove the blower, so, yes, you will need to replace all those gaskets. I'm sure Edelbrock has a kit.
Click to expand...
That's kinda what I figured it's not leaking horribly yet just don't want to start tearing it apart without everything to complete it. Thanks for the response
 
Top Bottom