Whats up yall I'm running some 22x12.5x35 on 22x14s fuel wheels and just got new tires but I feel like driving it is way to sensitive steering wise could it be the tire pressure ? Its at 59psi just got brand new tires there all 59
Tire pressure for 22X12.50R35 tires?
- Thread starter SOEBOMB
- Start date
22"? Dude, I have no idea what tire pressure you should use. Never run anything with a wheel diameter that big )except my mountain bike). 
But, you can figure it out using the chalk test.
www.intercotire.com
Good luck
But, you can figure it out using the chalk test.
Using The Chalk Method for Determining PSI | Interco Tire
Using The Chalk Method for Determining PSI - NOTE. This article is posted for reference only. You should always consult with your local tire installation professional(s) when you have questions about your tires.
www.intercotire.com
Good luck
I don't think you'll get to good of a ride out of them since there is hardly a sidewall. What is the load range on them?
OP
OP
59 psi seems way too high, but no matter what, you're never going to get a good ride out of 22s and those rubber band tires. You messed up by going with 22s if you wanted a good ride
OP
Yea the rides not bad just trying to clear that sensitive steering it has when I turn left or right59 psi seems way too high, but no matter what, you're never going to get a good ride out of 22s and those rubber band tires. You messed up by going with 22s if you wanted a good ride
OP
If you were running 17" tires I`d say drop them to 28psi but you need to lower the psi and do a chalk test until you get to the ride and contact pattern you want it may help with your problem
OP
Got the 17s in the garage for that off road fun ima make sure to drop them down now that I know that thanks man
Hooperdog
JK Enthusiast
add the drop brackets on the lower front control arms. it works. try to run 20 psi but probably won't notice a difference..
OP
OP
Hooperdog
JK Enthusiast