OK, my daughter just had a minor fender bender in our 2011JK. No one was hurt and no damage to the other vehicle, but the plastic cover on our front bumper is pushed in, right in front of the passenger side tow hook (see photo).
I’m hoping we can just pop it out somehow. I have various diameters of wooden dowels that I could round off to use as pushIng tools. Lots of stuff in my tool box, too, like a long extension for a 1/2” ratchet.
Not sure if we can reach It, though, from either under the bumper or thru the opening around the tow hook. Otherwise, how hard is it to remove the plastic bumper cover? I realize, there may still be some wrinkles in the plastic, but hopefully not overtly noticeable.
Your ideas and experience with a similar scenario, would be greatly appreciated. Also, if this proves to not be possible, does anyone sell just the stock plastic bumper cover? Thanks guys! BD
I’m hoping we can just pop it out somehow. I have various diameters of wooden dowels that I could round off to use as pushIng tools. Lots of stuff in my tool box, too, like a long extension for a 1/2” ratchet.
Not sure if we can reach It, though, from either under the bumper or thru the opening around the tow hook. Otherwise, how hard is it to remove the plastic bumper cover? I realize, there may still be some wrinkles in the plastic, but hopefully not overtly noticeable.
Your ideas and experience with a similar scenario, would be greatly appreciated. Also, if this proves to not be possible, does anyone sell just the stock plastic bumper cover? Thanks guys! BD