Modified Stock Bumper into Stubby Bumper

JKTim

JKTim

JK Enthusiast
Supporting Member
Joined
Dec 22, 2019
Messages
146
Location
Prior Lake, MN
Modified my stock bumper by cutting the ends and adding end caps.

F853A9F2-CA00-4E70-ABA1-778B09A8C466.jpeg


8AF39F4D-FF70-4F6D-AA41-ECE51D907C05.jpeg


2917F36C-6E58-4C9A-B7BF-CE5DB107C802.jpeg
 
  • Like
Reactions: Ballistic17
Good job JKTim. We have the same stubby taste. I did it a little bit different than yours.

vvv.jpeg
 
Last edited:
What did you use? I got an extra plastic front fender when I bought my JK and used a piece of it for the caps.
 
I bought a black colored chopping board.
I did not cut the inner metal bumper, then bent it inward to bolt the end plastic board (end cap).
That's why you see a lot of bolts. Your's looked like you glued-weld it on the edges.
But we have the same taste!
 
Oscar-Mike said:
I bought a black colored chopping board.
I did not cut the inner metal bumper, then bent it inward to bolt the end plastic board (end cap).
That's why you see a lot of bolts. Your's looked like you glued-weld it on the edges.
But we have the same taste!
Click to expand...
Yes I melted them together with a soldering iron.
 
Oscar-Mike said:
Nice! You need a fog light.
What year is your jeep? Looks like front suspension is modified.
Click to expand...
Yea, the previous owner tied the fog light wiring into the 2 spot light on the hood which is ok for now, but they are mounted to high for fog. Yes, the jeep is molded with 1 ton axles and a 4.5 rock krawler lift and steering kit w/ a redneck ram hydraulic ram assist
 
Top Bottom