WSS's latest activity
-
WSS replied to the thread J8 booster talk.Ohh, here was a poo finding, The O ring or seal between the MC and booster was not seated correct, it was pinched and half inside the... -
-
WSS replied to the thread J8 booster talk.I have made some progress. It is all out. Not fun or easy but out. I had to cut a bunch of wires that went through the firewall AND...
-
-
WSS replied to the thread Adjust brake booster stud placement.Could you drill the four booster stud clearance holes bigger with a step drill? Would that give the room needed?
-
WSS replied to the thread J8 booster talk.I don't have a pressure pot/bleeder. will check with my local parts place and see if they rent one. I do have the jscan that can...
-
I've read the same as the ABS system needs to be inactive to bleed the individual calipers, and the system needs to be reactivated to...
-
WSS replied to the thread J8 booster talk.started the project this evening. Got the clip off of the pedal arm, air compressor removed and the pcm/abs tray loosened up. Has...
-
-
Looking forward to reading the outcome.
-
WSS replied to the thread What did you do to your JK today?.Picked up the brackets and hardware kit for my coilover project. The brackets were raw. I Cerakoted them using the new "F" series...
-
-
WSS reacted to Jskunk's post in the thread Scared to drive ol' Red: another death wobble story with
Like.
I got most of the parts in the mail. Was able to get the tie rod and steering stabalizer on last night before the rain came. Feels... -
Hello, I'm sure there are many examples of back-up camera installs, but wanted to share where I mounted mine. The pigtail is just...
-
-
Took the JK out to Calico this weekend tackled some new trails. Bismarcks hairpiece, Sushi burrito, Vodkaberry, Bismarcks backdoor and...
-
-
WSS replied to the thread J8 booster talk.Update. I have the booster, MC and "seal" (o-ring really) in hand. I just sprung for the very $$ 68048758AA reservoir from mopar parts...
-
WSS replied to the thread No start, no relay activity.2007 TIPM's had issues. Pull your TPIM and look at date code, if it is 2006 or 2007, then it is original and a possible suspect. Here...
-
-
WSS replied to the thread No start, no relay activity.Run these tests on relay K3 to narrow it down: Check for 12V at Pin 86 Have someone turn the key to "START" You should get 12V at...
