pc1p's latest activity
-
pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus a 2010 Islander side project).The motor mounts are all welded up and painted... So I turned my attention back to the Rugged Ridge Switch Pod. I got the switches... -
-
pc1p replied to the thread Heater core back-flush fixed heat on 2011.Before I drop the Hemi in for the final time, I'm absolutely going to do this... I actually took a measurement of the heatcore hose...
-
I was about to hack into the dash to install a new heater core, as per the many YouTube videos illustrating how to do it. But I tried a...
-
Try this one; https://www.novak-adapt.com/catalog/transmission/transmission-parts/ax15-short-throw-shifter.html
-
pc1p replied to the thread Low idle hesitation.You'd want to bring it to a shop that can monitor the PIDs or get JScan + Dongle and do it yourself. You should be able to monitor fuel...
-
Do you have Jscan or know someone with a decent scanner to watch the live feed from your engine?
-
Ok, let’s break this down. “So, you have not been to the shop” I have been to the one on inland empire blvd in Ontario many, many...
-
pc1p replied to the thread Exhaust manifolds.Anecdote is great and all, but there are dozens of examples going back two decades of cars and trucks having similar failure rates: Ford...
-
We just wanted to say thank you to all of you for your support throughout 2025. We had a great year and have a lot of cool projects...
-
Make sure you check out all the grounding cables too. I replaced mine this year and the ribbon was barely held together.
-
pc1p replied to the thread Steering refresh.To be clear, both of those trails have been tackled successfully, thousands of times, on MB Jeeps running 30” tires. Heck you can rent...
-
pc1p replied to the thread Working out the Bugs.I didn't realize there were that many vacuum connections on a 3.8L, but glad you're getting it worked out...
-
2010 Wrangler JK Rubicon Bought it 5 months ago with at least 1 known vacuum leak. So far have found and repaired 9 leaks that was so...
-
pc1p replied to the thread Steering refresh.I just rebuilt the D30/D44 in my daughter's Islander and did a full suspension and steering refresh... I went with the Moog Steering...
-
pc1p replied to the thread JK rear brakes - rotors and pads.In over 30 years of wrenching (and with my dad being an ASE Master Tech for 15 of those years), I've used every OEM, premium...
