pc1p's latest activity
-
Ok, let’s break this down. “So, you have not been to the shop” I have been to the one on inland empire blvd in Ontario many, many... -
pc1p replied to the thread Exhaust manifolds.Anecdote is great and all, but there are dozens of examples going back two decades of cars and trucks having similar failure rates: Ford...
-
We just wanted to say thank you to all of you for your support throughout 2025. We had a great year and have a lot of cool projects...
-
Make sure you check out all the grounding cables too. I replaced mine this year and the ribbon was barely held together.
-
pc1p replied to the thread Steering refresh.To be clear, both of those trails have been tackled successfully, thousands of times, on MB Jeeps running 30” tires. Heck you can rent...
-
pc1p replied to the thread Working out the Bugs.I didn't realize there were that many vacuum connections on a 3.8L, but glad you're getting it worked out...
-
2010 Wrangler JK Rubicon Bought it 5 months ago with at least 1 known vacuum leak. So far have found and repaired 9 leaks that was so...
-
pc1p replied to the thread Steering refresh.I just rebuilt the D30/D44 in my daughter's Islander and did a full suspension and steering refresh... I went with the Moog Steering...
-
pc1p replied to the thread JK rear brakes - rotors and pads.In over 30 years of wrenching (and with my dad being an ASE Master Tech for 15 of those years), I've used every OEM, premium...
-
pc1p replied to the thread JKU Hemi Swap - Reference Guide & Swap Info.8HP70 Trans Cooler Fittings The ZF transmission can be found behind Ram trucks, as well as Jeep/Dodge SUVs and many cars. For Hemi...
-
-
pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus an Islander side project).My local powder coater, Route 247 Powder Coating & Sand Blasting, did an amazing job on my JSS brackets and parts: Since the shifting...
-
-
pc1p replied to the thread The battle against the dreaded P0300.I'm not 100% sure about Australia, but you can still get the connector repair kits from Mopar or dealerships...
-
pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus an Islander side project).After fiddling around with motor mount orientation and location, the Hemi fits! I used a set of motor mounts from AutoZone, PN#3277...
-
-
pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus an Islander side project).I got the J8 Booster and MC bench bled (twice!) and installed. I left the lines disconnected for the time being to allow me to get the...
-
-
Are you looking to solely carry kayaks on top? I bought some racks off of Amazon years ago. This was my setup. I have since bought a...
