Recent content by motogod77

  1. motogod77

    Suggestions for bumpers with winch area

    I found a 1st gen XRC bumper for not much over 200 shipped and it is very very good for the money.
  2. motogod77

    Rubicon Locker Switch Mod or Kit

    Are you using it?
  3. motogod77

    Rubicon Locker Switch Mod or Kit

    Looking for the best DIY instructions or best kit to “fix” my factory Rubi switches so I have control over the lockers at anytime. My LJ PFA
  4. motogod77

    What price should I ask for factory wheels and tires?

    I was going to ask 800.00 - 1000.00 for my Rubicon 17’s and near new Falcon Wildpeak MT 33’s including the spare and worn AT Tires new are 800 plus mounting so I figured 1K for all 5 is a pretty solid deal.
  5. motogod77

    37 inch tires and axle shafts

    It sounds like you have a d30 in a non-rubicon maybe? The Rubicon axles are different Front and Rear and and have 4.10’s stock.
  6. motogod77

    37 inch tires and axle shafts

    Not one bit, I have heard the JK axles are quite strong and would like to know if the stock axles will hold up - just as asked. Or are shafts required / trusses required like on the TJ/LJ hybrid 44’s.
  7. motogod77

    37 inch tires and axle shafts

    Your guys are all too much lol! I have a fully built LJ on 37’s with a “real” d44 up front with chromo axles, 5.13’s, detroit, psc and it will take all the abuse that can be thrown at it! I was trying to find out about the strength in the “hybrid” stock JKUR d44 on 37’s ...... its not a real...
  8. motogod77

    P0480 Cooling Fan Failure

    Well at least this very comfortable, nice, well mannered Jk follows in typical Jeep fashion and throws a code within two weeks of buying it. Any insight to this code? I cleared it and ran to temp numerous times, out about 20 miles and no return of CEL yet!
  9. motogod77

    Question about AEV Dual Sport 3.5" lift

    I bought my AEV lift used from a friend and it had been running 35’s no problem. I am going with fender flares and 37s!
  10. motogod77

    Looking for suggestions on new fender flares

    Stumbled across amazon find ..... Hooke Road! Seems like an amazing deal for steel flares for 200!
  11. motogod77

    37 inch tires and axle shafts

    Thanks! I was thinking Dutchman if I do it, but Yukon kits are 1/2 the money and it’s only a 37 ....... choices hmmm
  12. motogod77

    37 inch tires and axle shafts

    So after the 3.5” AEV lift, MEC fenders, 5.13 gears, and 37’s do I need to upgrade the axle shafts??? 2013 JKU Rubicon I’ve read a lot on this and not clear how strong they are for offroad abuse. Probably not doing anything more serious than the Rubicon trail (pretty easy stuff).
  13. motogod77

    Question about AEV Dual Sport 3.5" lift

    After a quick call to AEV the kit does come with geometry brackets, however they are not mentioned in the instructions lol. There are separate instructions for those on a different part of the website.
  14. motogod77

    Looking for suggestions on new fender flares

    Genright is very expensive! the mce fenders are expensive compared to the amazon/ebay garbage but they pack a lifetime warranty and are flimsy chinese garbage
  15. motogod77

    Looking for suggestions on new fender flares

    I’m going to run MEC fenders until I can muster up the cash for full Genright Armor. They’re definitely more expensive, but you get what you pay for. https://www.mcefenders.com/product/jeep-jk-fenders-front-and-rear-narrow-width-07-18-wrangler-jk-gen-ii-mce-fenders