Mopar's latest activity

  • M
    Mopar replied to the thread Lift recommendation.
    Yes it should eliminate the need for spacers. I don’t have spacers on mine with the aftermarket driveshaft and it works great. Much much...
  • M
    Mopar replied to the thread P0016 before warm up.
    Sounds like the dealer needs to fix their work. Are they working on it?
  • M
    Mopar replied to the thread P0016 before warm up.
    Do you have JScan? If so, did you do the cam/crank relearn procedure?
  • M
    Mopar reacted to Cimmerian's post in the thread Vacuum pump issue? with Like Like.
    Mine and his are 07-11 JKs, we don't have one.
  • M
    Mopar replied to the thread Lift recommendation.
    If you post what kit you lean toward, I’ll make some recommendations on what else you will need and what else I recommend. I’m not an...
  • M
    Mopar replied to the thread Lift recommendation.
    Yep front driveshaft only. My 3.25 ish lift had a pretty steep angle on the front driveshaft but the rear is almost straight. l’m...
  • M
    Mopar reacted to Yittzy's post in the thread When to replace trail-damaged tires with Like Like.
    honestly if the sidewall's messed up you gotta replace it. that's not safe. but if it's just the tread area and not too deep i've kept...
  • M
    Mopar replied to the thread Lift recommendation.
    I wouldn’t bother with a body lift. Spacer lift be fine if you just want a small height gain. You WILL need a front driveshaft...
  • M
    Mopar replied to the thread Ceiling/roof insulation.
    There is but not what I want to do. I want a factory made solution.
  • M
    Mopar posted the thread Ceiling/roof insulation in JK General Discussion.
    Anyone have any strong opinions on best ceiling insulation? 2016 JKU with hard top and freedom panels. I want to insulate the...
  • M
    Mopar replied to the thread Vacuum pump issue?.
    My friend came by today and we worked on his 2016 Jeep. His vacuum pump is in the original location. We pumped the brakes with the...
  • M
    Mopar reacted to Cimmerian's post in the thread Shock Recommendations with Like Like.
    I'd go with the Bilsteins for a "budget" shock, honestly. I had those on my Blazer and they were fine.
  • M
    Mopar replied to the thread Shock Recommendations.
    I know they are popular in some circles but I don’t like them….Rancho shocks. Too soft in my opinion….and they have to cycle a time or...
  • M
    Mopar replied to the thread Revisiting GMRS in 2026.
    I have and use the TYT TH8600 for FRS, GMRS, and MURS. It’s not type accepted so not really supposed to be used on those frequencies but...
  • M
    Mopar replied to the thread When to replace trail-damaged tires.
    I have plugged sidewalls of tires with a plug kit. But, it’s just to get back to civilization. And, if it’s big enough, it usually keeps...
Show older items
Top Bottom
Back