Recent content by chrispeel2001

Got it seated finally. I was using the wrong collar for the bj press. Once I used the correct one it went in the rest of the way. Thank you for responding!

Replacing ball joints. I got the lower one in all the way but the upper one won't seat all the way. Not sure what to do. Any suggestions?

Could this be the culprit for my death wobble? I lifted the tires and the don't budge, so ball joints are good I guess. Any thoughts?

Got it figured out. I decided to pull out all the wires and look over them. I finally noticed a wire had come disconnected from some kind of small junction box. I reconnected it and lights were all working. Thanks for the tips everyone

Standard bulb

Got the quick flash on my turn signal. Turns out the rear turn signal bulb was burnt out. I replaced the bulb with a new one and it still doesn't come on. I replaced that bulb and still no turn signal. The bulb lights up when I turn the lights on. I also found out the same bulb isn't...

The damn misfire is back, with? It's the only code P0300. I've changed the spark plugs and wires. It's not the o2 sensors. When I start her up she misfires, but once I've been driving for about 10 minutes or so it stops and drives like normal.

Excellent. Free, my favorite four letter word, next to cash, that is

Definitely lesson learned about oem vs bush league. I have a code reader but it doesn't tell me anything about the speed sensor. It's one that connects to my phone.

Not sure. I never use it but I'll try it tonight and see

Update I gave up trying to figure it out. I took it to a shop. They replaced the o2 sensors I had with oem sensors and that fixed it. No more codes and no more cylinder misfire. Now all I have to figure out is the traction and esp lights

I did reset the ecm and nothing changed. Definitely not a factory cat. I Honestly don't remember the o2 sensor brand.

Pt 2

I've been struggling with some o2 sensor codes and nothing has been working. I replaced all the sensors, didn't fix it. Did the ground repair as was suggested, didn't fix it. Replaced the ecu and didn't fix it. Before I had this issue I had a code that said the cat was bad. I bought one...

It's was coolant. It suddenly stopped. Then I noticed the liquid swishing sound, burped the system and no swishing and no leak 🤷‍♂️