BLACKJKU's latest activity
-
Lol, I love the confidence!! It absolutely does, but only on the 3.6L versions… they sell relocation kits everywhere and are commonly... -
A real JK doesn't have a vacuum pump. ;)
-
BLACKJKU replied to the thread Vacuum pump issue?.A JK doesn't have a Vacuum Pump.
-
BLACKJKU reacted to SirNajera's post in the thread Took off transmission skid plate and... with
Like.
Wow, thank you!!! :) Day saved haha. -
BLACKJKU replied to the thread Took off transmission skid plate and....Here's what you'll need, https://www.amazon.com/Factory-Replacement-Joint-Kit-High-Angle/dp/B0FF9XCXW8?tag=wranglerorg-20
-
BLACKJKU replied to the thread Took off transmission skid plate and....Does your Jeep have a lift? You can buy a rebuild kit for that, I bought one on Amazon a few years ago. It's not to bad of a job, but...
-
BLACKJKU replied to the thread Vacuum pump issue?.Would explane why his brakes still work good, if the brakes didn't or had a hard pedal then he would know the pump wasn't working. When...
-
Couldn't find anything definitive, it seems that the pump runs as needed while the engine is running but may not at other times. It is...
-
Did you have vacuum assistance the whole time with just key on before the move? Honestly, now I'll have to check if I do without the...
-
BLACKJKU replied to the thread 3.8 misfire.If you need to get a O2 Sensor be sure to buy NGK's, they are OEM.
-
Well got it all back together. Misfire gone. I still have to chase a few issues. Sensor 1 bank 1 won’t clear and a reverse light...
-
With help from others figured out it goes to firewall and then hood. 2cables are the wiring loom grounds they go to the block. Cleaned...
-
Will find out today after I get the exhaust reinstalled. Fingers crossed
-
BLACKJKU replied to the thread 3.8 misfire.So it fixed your problem then?
-
BLACKJKU replied to the thread 3.8 misfire.My guess it would either go to the frame or the body. Where do the 2 cables go to that are where the nut and big washer is to the left...