BLACKJKU's latest activity
-
BLACKJKU replied to the thread TPMS troubleshooting dead end.It's just one of the many electrical gremlins these JK's have, the more unnecessary ones you can delete the better. -
I've heard that a lot, i'd just prefer to use that as the last possible option.
-
BLACKJKU replied to the thread TPMS troubleshooting dead end.Everyone that has any issues just use JSCAN to delete the TPMS, that's the best advice I can give.
-
BLACKJKU replied to the thread Random tire pressure alerts.JSCAN and a OBD Dongle is what most will use.
-
Can your scanner read what the sensors set at? As @BLACKJKU said...most of us delete TPMS because of issues or bigger tires.
-
BLACKJKU replied to the thread O2 Sensor issue.Only the down stream, but I find it hard that only 1 of them is causing a problem. I can't guarantee this will be your fix, but if the...
-
BLACKJKU replied to the thread O2 Sensor issue.If they are aftermarket you may need to do O2 Foolers like I had to do with my High Flow Cats. Read this link I gave you...
-
BLACKJKU replied to the thread O2 Sensor issue.Were the new Cats OEM if not then that would be throwing a code, or is it just one side doing the code. What Brand of O2's were used...
-
My JKU did the same thing recently, let it cool off and it will start. But it did get worse. It was the TIPM. To be clear, do you get a...
-
BLACKJKU replied to the thread Random tire pressure alerts.It's the best fix for your problem, delete the TPMS and check the tires on a regular schedule. That's just another one of the JK's...
-
We checked battery cables, fuses, replaced the starter - problem still persists. Will be trying the starter relay and having the battery...
-
Had that issue on an Escalade before, narrowed it down to a negative battery cable that looked just fine - even when my mechanic and I...
-
BLACKJKU replied to the thread Synthetic oil.I'm not really sure it's better for cold starts, but they do say you can get better mileage from using it. I like to add a little Lucas...
-
My guess is junk factory clamps not fully seated and causing intermittent starting issues. Ask me how I know! Temp fix - loosen and...
-
BLACKJKU replied to the thread 2012 Wrangler no crank, no start issue.It's probably those junk battery clamps, but just wanted to let you know about some other things that can do the no start.
