Missing Bump Stop

[JKowner61]

Hello,
I’m working on my new to me 2007 JK Wrangler. I am the 3rd owner.
According to owner 2, owner 1 put a 3” lift kit in it. Either she didn’t say the brand or I have forgotten it.
While putting rear brakes and shocks on it, I noticed I am missing a bump stop on the driver side. I’m hoping someone can identify what I need from the attached pictures.
These are pictures of the passenger rear bump stop. It looks like the exposed part measures about 4 inches.
Thanks in advance.

 

[Mopar]

That looks like it’s an extended jounce bumper. The rubber part is called a jounce bumper. Not sure what brand you have on there.

Or, you can replace both sides with something like this:

https://www.extremeterrain.com/teraflex-bump-stop-extension-kit-for-3-lift-0718-jk.html

I’d probably replace both sides

 

[Baja-D]

There are like a hundred of them for sale on ebay....pick ones the 4 inch length and that fit your year jeep. I use a pry bar thru the spring to push it in. You may need to jack the body up to open up the spring to full droop to get it inside. A rubber mallet is handy also.

 

[JKowner61]

That looks like it’s an extended jounce bumper. The rubber part is called a jounce bumper. Not sure what brand you have on there.

Or, you can replace both sides with something like this:

https://www.extremeterrain.com/teraflex-bump-stop-extension-kit-for-3-lift-0718-jk.html

I’d probably replace both sides

Thanks

 

[JKowner61]

There are like a hundred of them for sale on ebay....pick ones the 4 inch length and that fit your year jeep. I use a pry bar thru the spring to push it in. You may need to jack the body up to open up the spring to full droop to get it inside. A rubber mallet is handy also.

Yeah, I started looking and like you said they were hundreds. The few I looked at for 3” lifts weren’t that long, so I thought I would ask people who knew more about it.

 

[Mopar]

A little dish soap will help it go in.