I had the clutch replaced on my 2013 2-Door in May, 2026. Since then, i having intermittent Crank No Turnover issue. Work was done at the dealer. They indicate they’ve checked everything. Also, they are not able to get Wrangler to repeat the issue. “ since the issue cannot be repeated, we cannot diagnose the problem or then repair” Jeep has 109k miles and in great shape except this crank issue, that was NOT there before the Clutch replacement. Help, I’m very frustrated. Thx.
Intermittent crank no turn over
- Thread starter DHCharlie
- Start date
Did you try putting the T-case in 4 low and see if it makes a difference, 4 low is supposed to bypass the neutral safety switch.
Yes, it does crank and turn over when I switch to 4-L. I’ve expressed this to the dealer, nothing. I’ve asked them to check the Clutch safety interlock circuit. I’m not convinced they did.
Yes, it does crank and turn over when I switch to 4-L. I’ve expressed this to the dealer, nothing. I’ve asked them to check the Clutch safety interlock circuit. I’m not convinced they did.
Your description is a little unclear, but if it’s intermittent, then I would look at possibly a crankshaft position sensor
When you put the T-case in 4 low it bypasses the Clutch safety switch so i'm sure you found your problem.
You can bypass the safety switch, there is info on the web about doing that.
You can bypass the safety switch, there is info on the web about doing that.