Hey guys! Buying this 12 rubicon tomorrow. Is it normal for the stabilizers to droop in the middle like that? I thought they were always supposed to be straight.. new to all of this, any insight is accepted! Thanks!
Does this look normal? Dual stablizer
- Thread starter EP4
- Start date
Hey guys! Buying this 12 rubicon tomorrow. Is it normal for the stabilizers to droop in the middle like that? I thought they were always supposed to be straight.. new to all of this, any insight is accepted! Thanks!
The middle should def not droop like that .
Dual stabilizers are more for show . A properly front end set up only needs one stabilizer .
Would suggest to get Jeep inspected with a good focus on alignment and geometry on front end .
It’s possible current owner was chasing around wobble or vibration and put on a band aid “ dual stabilizer” hoping it would fix problem
Last edited:
The clamps on the middle section that is drooping are probably loose. Just push it back up where it should be and tighten the clamps back up.
I used to have the same setup on mine when I bought it.
I used to have the same setup on mine when I bought it.
Given that the fairlead is painted I'm guessing this was set up for aesthetic reasons.
On the bright side, we can be fairly certain that in spite of the "off road life" sticker, the gravel in the pic is the most dirt that rig has seen. That brace looks to be lower than the dif!
On the bright side, we can be fairly certain that in spite of the "off road life" sticker, the gravel in the pic is the most dirt that rig has seen. That brace looks to be lower than the dif!